Nickel metallisation of Si by dynamic ion-beam mixing

Abstract

Thin Ni films were prepared at room temperature by Ni metal vapour deposition and simultaneous irradiation by Ar ions with an energy of 2–20 keV. The reaction of Ni with Si during dynamic ion-beam mixing was studied. The fluences of the ion beam were 4.7 × 10¹⁷ and 8.9 × 10¹⁷ cm^?2, and arrival rate ratios Ni/Ar were 9.7 and 5.1. Concentration profiles of Ni, Si, C, and O were analysed with Auger electron spectroscopy; the surface morphology and the crystalline structure were investigated with a cross-sectional scanning electron microscope and X-ray diffractometry. The theoretical profiles were calculated with the dynamic Monte Carlo simulation T-DYN for comparison with the experimentally obtained profiles. It was possible to observe the ballistic mixing effects and also thermally activated formation of nickel silicide.     

Pulsed EPR Dipolar Spectroscopy under the Breakdown of the High-Field Approximation: The High-Spin Iron(III) Case

Pulsed EPR dipolar spectroscopy (PDS) offers several methods for measuring dipolar coupling and thus the distance between electron-spin centers. To date, PDS measurements to metal centers were limited to ions that adhere to the high-field approximation. Here, the PDS methodology is extended to cases where the high-field approximation breaks down on the example of the high-spin Fe³⁺/nitroxide spin-pair. First, the theory developed by Maryasov et al. (Appl. Magn. Reson. 2006 , 30, 683–702) was adapted to derive equations for the dipolar coupling constant, which revealed that the dipolar spectrum does not only depend on the length and orientation of the interspin distance vector with respect to the applied magnetic field but also on its orientation to the effective g-tensor of the Fe³⁺ ion. Then, it is shown on a model system and a heme protein that a PDS method called relaxation-induced dipolar modulation enhancement (RIDME) is well-suited to measuring such spectra and that the experimentally obtained dipolar spectra are in full agreement with the derived equations. Finally, a RIDME data analysis procedure was developed, which facilitates the determination of distance and angular distributions from the RIDME data. Thus, this study enables the application of PDS to for example, the highly relevant class of high-spin Fe³⁺ heme proteins.     

Biobased poly(2,5‐furandimethylene succinate‐co‐butylene succinate) crosslinked by reversible Diels–Alder reaction

We synthesized biobased poly(2,5‐furandimethylene succinate‐co‐butylene succinate) [P(FS‐co‐BS)] copolymers by polycondensation of 2,5‐bis(hydroxymethyl)furan, 1,4‐butanediol, and succinic acid. These copolymers could be crosslinked to form network polymers by means of a reversible Diels–Alder reaction with bis‐maleimide. The thermal properties, mechanical properties, and healing abilities of the P(FS‐co‐BS)s and the network polymers were investigated. The mechanical properties of the network polymers depended on the comonomer composition of the P(FS‐co‐BS)s and the maleimide/furan ratio in the network polymers. Some of the copolymers exhibited healing ability at room temperature, and their healing efficiency was enhanced by solvent or heat. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 216–222     

Chemical Synthesis of Native-Type Cellulose and Its Analogues via Enzymatic Polymerization

Abstract

The first successful chemical synthesis of cellulose was achieved by a polycondensation of β-cellobiosyl fluoride monomer catalyzed with cellulase, an extracellular hydrolytic enzyme of cellulose, in a mixed solvent of acetonitrile and acetate buffer. The product, synthetic cellulose, was the crystalline allomorph cellulose II, a thermodynamically more stable form. More detailed examinations of the polymerization conditions led to the formation of the native cellulose I, a metastable allomorph, for the first time. The key to the success was to use partially purified cellulase and an appropriate mixed solvent of acetonitrile/buffer. The formation of the two allomorphs of cellulose implies that the polarity of the glucan chain ordering can be controlled in a test tube. Based on these findings, a new concept “choroselectivity,” meaning spacial control in ordering the macromolecular chain, has been proposed. Cellulose analogues, 6-O-methylated cellulose and xylan, have been synthesized regio- and stereoselectively by using the enzymatic polymerization technique.     

Synthesis and Polymerization of Spiro Oxyphosphoranes

Novel methods of synthesis of spiro acyloxyphosphoranes are described emphasizing the significance of the first isolated instance of these new species. Then, the no-catalyst alternating copolymerizations of the combinations of cyclic phosphorus(III) compounds (serving as nucleophilic monomer, M_N) with acrylic acid derivatives and with α-keto acids (electrophilic monomer, M_E) are mentioned. These copolymerizations proceed without added initiator. Spiro oxyphosphoranes play an important role in the copolymerization scheme in the equilibrium with the ⁺M_N - M_E ^? zwitterion, the key intermediate of the copolymerization. Finally, new reactions of spiro acyloxyphosphoranes with nucleophiles, alcoholysis and aminolysis polymerizations are presented.     

Helicity Control in the Preparation of Chiral Co-crystals from Tryptamine and Achiral Carboxylic Acids by Pseudo-seeding

Abstract

Chiral crystals of tryptamine and achiral carboxylic acids such as p-chlorobenzoic acid, cinnamic acid, p-chlorocinnarnic acid and p-methylcinnamic acid were prepared by crystallization from the solutions of both components. All the crystals belonged to typical chiral space group P2₁2₁2₁. The crystal chirality is generated through the formation of a unidirectional twofold helix between the two components through quaternary ammonium salt interaction and hydrogen bonding in the lattice. This kind of spontaneous crystallization necessarily gives crystals of both clockwise and counterclockwise helicites. Here, pseudo-seeding based on utilizing these crystals as seed crystals was examined, resulting in successful helicity control in crystallization from solutions of tryptamine and different carboxylic acids.     

Effects of Bis(aromatic) Pendants on Recognition of Nucleobase Thymine by Zn2+ -1,4,7,10-tetraazacyclododecane (Zn2+ -cyclen)

We have previously shown that the nucleobase thymine binding to Zn²⁺ -cyclen (cyclen=1,4,7,10-tetraazacyclododecane) complex became stronger by appending acridine, naphthalene, or quinoline rings to the cyclen. Amongst these, the pendant bis((1-naphthyl)methyl) or bis((4-quinolyl)methyl) groups yielded the most effective thymine-recognizing Zn²⁺ -cyclen complexes [J. Am. Chem. Soc., 121 (1999) 5426]. The present study was undertaken to find causes of the bis(aromatic) ring effect by X-ray crystal structure analysis and NMR studies. The crystal structure of the Zn²⁺ -bis((1-naphthyl)methyl)-cyclen complex with a deprotonated 1-methylthymine (1-MeT) failed to show the anticipated evidence for the double ~ - ~ stacking interactions between the two naphthalenes and the Zn 2+ -bound 1-MeT m (1-MeT m =N(3')-deprotonated 1-MeT). Crystal data: formula C₃₆ H₄₇ N₇ O₇ Zn, M r =755.19, monoclinic, space group P2₁/ c (No. 14), a =15.438(2) Å, b =14.093(3) Å, c =16.726(2) Å, g =90.53(1) V =3638.7(8) Å 3 Z =4, R =0.035, R _w =0.049. However, the ¹H NMR studies of Zn²⁼ -bis((4-quinolyl)methyl)-cyclen with 1-MeT in varying H₂O/CH₃ CN solution showed increasing upfield shifts of Me(5') and H(6') of the Zn²⁺ -bound 1-MeT in more aqueous media, indicating that the double intercalation with the two quinolines became more significant in more protic environments. We conclude that the double ~ - ~ stacking effect accounts for the enhanced recognition of thymine base by the appended bis((1-naphthyl)methyl) or bis((4-quinolinyl)methyl) groups.     

New Preparation of Cyclic Acyloxyphosphorane by Reaction of Glyoxylic Acid with Phosphorus(III) Compounds

We have recently found that the reaction of α-keto acids (1) with phosphorus (III) compounds (3) yielded cyclic acyloxyphosphoranes(C-AOPs, 4), a new class of pentacovalent phosphorus species having a P-OC(O) group.^{1, 2)} The present paper deals with a new reaction of glyoxylic acid (2) with 3 to give C-AOPs (5) having no substituent at the C-3 position. 1 is an α-keto acid whereas 2 can be taken as an α-formyl acid. Although it is well known in the field of organic chemistry that the formyl group often behaves differently from a keto group, the reaction of 2 with 3 provides an example in which both groups behave in a similar manner.     

A screw-shaped alignment of pyrene using m-calix[3]amide

m-Calix[3]amide bearing three pyrenes (1a) was prepared by the condensation reaction of 3-nonylaminobenzoic acid derivative using Ph₃PCl₂. Pyrenyl groups were found to be aligned in the screw-like fashion by m-calix[3]amide as confirmed by the X-ray crystallography. Aromatic proton signals observed at the up-field region in the ¹H NMR spectrum at low temperature indicated that pyrenyl groups in 1a are aligned in close proximity in THF solution. UV–vis absorption and fluorescence emission spectra did not show marked peak shift nor concentration fluorescence quenching compared with reference compounds implying no significant electronic interaction between pyrenyl groups. These results can be explained by the steric effect of the m-calix[3]amide platform. On the other hand, an excimer emission was observed for m-calix[3]amide having a flexible spacer between pyrene and m-calix[3]amide (1b).